Tips for Hydraulic Hose Repair in San Jose, CA

Tips for Hydraulic Hose Repair in San Jose, CA

June 27, 2019

There are many different types of equipment and machines that rely on hydraulic hoses for their operation. These hoses are generally reliable and durable, but they will eventually break with regular wear and tear, at which point it’s important to have a professional come out to make the appropriate repairs.

Until you can have a professional come out and fix the problem permanently, though, you might have to make a quick hydraulic hose repair in San Jose, CA that will hold you over until the pro can take a look. If this happens, here are the steps you need to take:

  • Know the hose that’s broken: There may be several different hydraulic hoses on your machine, each of which serves different functions and has its own pressure ratings. Therefore, it’s important to make sure you identify which hose needs repair and the specification that hose must meet before you take any additional steps to address the problem.
  • Remove the area that’s been damaged: Cut out the damaged section of the hose. Even if the problem is just that you have a leaking coupling at the end of the hose, you should still cut off the end that’s been damaged so you can more easily clean out the area of any dirt, dusts and contaminants. This is important, because even small amounts of dirt could result in significant damage to some of the internal components of the system, which could lead to further costly repairs.
  • Use an adapter: Hydraulic adapters are necessary in some cases to finish the installation of a newly repaired hydraulic hose. This is because you may or may not have the exact type of hydraulic coupling you need, or even access to that type of coupling, so it’s a good idea to have a kit on hand with a variety of adapters you can install as needed. Place the adapters into the proper ports, ensuring you’ve made a solid connection. The tightness of the connection is crucial, as over- or under-tightening could have an adverse impact on the overall hydraulic system. You can check with the system’s manufacturer for more information about how much torque to apply when tightening.
  • Make sure you’ve got the proper length: When you put the hose assembly into place, make sure it’s got enough length. A hose that’s overstretched or otherwise poorly routed will be put through additional wear and tear due to the greater amount of pressure. You also want to avoid having too much hose, though it’s still better to have too much than too little.
  • Check the seals: Make sure the hose is sealed correctly at the port, as even small gaps or slight imperfections in the seal could result in some significant problems. The seal should be secure in place, but you should avoid overtightening.

For more information about performing some quick hydraulic hose repair in San Jose, CA when you’re out in the field, we encourage you to contact the expert team at Royal Brass Incorporated today.

Categorised in: